The wear/abrasion of engine bring about
engine malfunction, and what's worse, shorten vehicle life. Therefore,
concerning engine maintenance, it is vital vital that you control the wear and
tear inside engine. This is the technician who have done auto repair for three
decades, using many obd2 diagnostic tools and doing lots of
repair jobs; providing you tip for reducing engine wear.
Select good quality engine oil. It cannot
be ignored wear under say for example a hot temperature, pressure, and
high-speed. When it is lasting for an extended time, especially trucks with
exceeding load, it wears more. Excellent engine oil not just could have a
control on engine wear, but in addition prevent through the carbon deposition
and grease efficiently. That way, it could possibly reduce the wear of engine
surface.
Choose quality lubrication oil. Many brands
lubrication oil has high quality in anti wear, the less wear, more power the
engine, and longer the life span of engine. Other than normal a higher level
water and oil, look closely at water/oil dashboard is essential to cut back the
damage of engine. Normally, it will control temperature of water keep 80c, and engine oil pressure in 0.5 kilogram
in low speed, 2 to 2.5 kilogram in broadband.
Some vehicles have engine oil light, and
you could check lights condition to confirm engine oil pressure. Or you could
also have a review oil service light, if have problem, just use OT901
Oil service light to be checked. Repair timely is pretty important.
Good driving habits. Improper driving
habits can have a huge damage to engine. You have to have a good management of
vehicle speed, master coordination between the engine rotate and gears. Avoid
first gear high-speed, or high low speed. Keeping vehicle speed with a constant
speed is excellent, prevent from step pad or speed suddenly, or change lane
frequently.
This entry was posted in Auto
Diagnostic and tagged obd2 diagnostic tool by obdseo. Bookmark the
permalink.
No comments:
Post a Comment